| Autor |
|
|
|
| process of water protection |
|
|
| 2278 Beiträge - Forenlegende
|
|
|
<p>the decoration should pay attention to the protection of the waterproof layer, if inadvertently damaged, to timely repair, so as not to leave hidden dangers. 2, floor tiles are good ground waterproof If the original tiles need to replace the bathroom, we must first use the cement mortar to the ground level, do waterproofing, so you can avoid water-proof coating due to uneven thickness caused by leakage. Before doing waterproofing, be sure to clean up the ground, with polyurethane waterproof coating repeatedly </p>
<p>brushing 2 to 3 times. The bathroom from top to bottom all the water pipes to protect the root, starting from the ground up to 10 to 20 cm of polyurethane waterproof coating, and then re-do the ground polyurethane waterproof, with the original waterproof layer to form a composite waterproof layer to enhance water resistance. 3, the wall is good to do the water toilet Bath when the water will splash to the adjacent wall, such as no waterproof layer protection, wall and wall of the top corner of the wall easy to </p>
<p>mildew. So be sure to tile the wall before the shop, do a good job waterproofing the wall. General waterproof wall to do 30 cm high water treatment, but non-load-bearing light wall, it is necessary to do the whole wall waterproof. 4, whether the wall water pipe construction done in the pipeline, floor drain and other through the floor, the hole around the waterproof layer must be carefully construction. Wall buried pipes, so that a reasonable layout, the laying of pipes shall be greater than the diameter of the groove, </p>
<p>plastic wood for my patio floor <br />
recycled garden timbers <br />
building a sliding wall panel for a fence </p>
|
| Beitrag vom 02.11.2016 - 08:59 |
|
Usermap
Seitenanfang: